Leica-biosystems IPS Bedienungsanleitung PDF herunterladen (Seite 55)

Leica IP S

6. Cleaning and Maintenance

Once a week or if message "15" is

displayed, the print head must be

cleaned manually.

Preparing the printer

• Open theprinter lidandthen

press buttons CLEAN and

LOADED simultaneously.

• The print head (72) moves

upward to a position approx.

1 cm away from the sealing lip

(Fig. 53).

6.2 Clean print head

• Carefully inserttheswab (89) into the gap

under the print head and apply light pres-

sure upwards (on print head) and move the

foam swab back and forth (Fig. 55) (approx.

10 times!).

This procedure removes dried ink residues.

Fig. 53

• Pushthe lever(69) upwards, then remove

the red location plate (70) with the sealing lip

(Fig. 54).

• Moistenoneofthefoamswabssuppliedwith

the instrument (73) with some alcohol. Be sure

not to use too much alcohol—no alcohol may

drip into the instrument.

Fig. 54

Fig. 55

Never use acetone or xylene! Only use

alcohol 95 % or 100 % for cleaning pur-

poses.

Never rotate the swab—this can dam-

age the nozzle plate of the print head.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 69 70

Keine Kommentare

Leica-biosystems IPS Bedienungsanleitung Seite 55