Leica-biosystems IPS Bedienungsanleitung PDF herunterladen (Seite 25)

Leica IP S

• Unscrewthe8screws(2, Fig. 8) on the sides

of the wooden box and loosen the cover.

• Removetheaccessorybox(7, Fig. 9) including

accessories and packaging material) - directly

under the lid.

• Unscrewthe8screws(3, Fig. 8) on the floor

of the wooden box on the exterior.

• Removetheinteriorcartonaroundtheinstru-

ment.

• Carefully removethe woodenboxfrom the

baseplate.

• The printerissecured with4plates (5) on

the wooden floor of the outside box. Loosen

the two screws (4, Fig. 10) on the base of the

instrument. Remove the plate from the bottom.

• Placethe printerfrom thebaseplateon a

stable laboratory bench - or, if present, on the

automated unload station. Make sure that the

stage is leveled!

Fig. 9

Fig. 10

When unpacking the printer, at least

two people (one person on each side

of the printer) are required to lift the

printer out of the box and place it onto

the laboratory bench.

Fig. 11

• Iftheinstrumentwassetupatitsfinalareaof

use, remove the blue foam transport anchor

(6, Fig. 11) (pull upwards).

4. Instrument Setup

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Keine Kommentare

Leica-biosystems IPS Bedienungsanleitung Seite 25